PDMs

Hardwire's all new PDM28, now with more power and versatility. A PDM (Power Distribution Module) is a device used to replace conventional relays and fuses in a vehicle electrical system. The Hardwire Electronics PDM takes inputs from physical switches, analogue voltages, or the CAN bus, and provides power as needed to different attached loads - such as radiator fans, lights or pumps. The current being drawn from each connected load is continuously monitored. If the measured current is too high due to a fault, the PDM switches off the respective output to prevent further damage to the wiring loom or the connected device. The PDM can then retry the output to see if the fault has cleared. Solid State technology ensures maximum reliability, without the drawbacks of conventional mechanical relay and fuse systems. Vibration, water and dirt are no longer a problem. Hardwire PDMs have been used in a range of applications - from drilling machines in ore mines, to top-spec drag race cars, to EV trucks, and even in industrial greenhouses to actuate ventilation windows. Allowing the user to configure the PDM to suit their own needs is one of its greatest strengths.

Fuses? Relays? Not anymore. If you're rewiring your entire car, you better be starting with a PDM. And AIM makes this easy by combining their easy to use dash and PDM kit. The PDM Kit includes: New INTEGRATED Power Distribution Module + PDM32 with 28 High Side Outputs and 4 Half Bridge Outputs + 4 gigabytes Datalogger + Dash controller Dash 6” (No Icons) GPS Module for automatic Lap Time and track position

Fuses? Relays? Not anymore. If you're rewiring your entire car, you better be starting with a PDM. And AIM makes this easy by combining their easy to use dash and PDM kit. The PDM Kit includes: New INTEGRATED Power Distribution Module + PDM32 with 28 High Side Outputs and 4 Half Bridge Outputs + 4 gigabytes Datalogger + Dash controller Dash 10” GPS Module for automatic Lap Time and track position

The PDM 15 is our mid-range PDM, offering all the features of the PDM 10 but adding additional outputs for a total of 15 full configurable and programmable outputs, and 2 canbus networks. The PDM 15 can support a total of 180A of current in the electrical system. Use the canbus networks to trigger outputs in the PDM based on data streaming from the ECU or other canbus devices, then send canbus data from the PDM to your digital dash or datalogger to allow understand the current status of your car's electrical system. The PDM 15 includes the Deutch connectors and pins to get set up and running. Contact us to have your PDM preconfigured before shipping.

The PDM 25 is our top of the line PDM, offering all the features of the PDM 15 but adding 10 additional outputs for a total of 25 full configurable and programmable outputs. The PDM 25 has the same 2 canbus networks for easy integration with other canbus enabled devices and can support a total of 180A of current in the electrical system. Use the canbus networks to trigger outputs in the PDM based on data streaming from the ECU or other canbus devices, then send canbus data from the PDM to your digital dash or datalogger to allow understand the current status of your car's electrical system. The PDM 25 includes the Deutch connectors and pins to get set up and running. Contact us to have your PDM preconfigured before shipping.

Control your PDM or other CAN bus enabled devices with the blink marine 12 key keypad. We pre-program all of our keypads and label them with the appropriate CANBus Speed and ID. Confirmed to work with AIM, Hardwire, HTG GCU's, plus many more.

Control your PDM or other CAN bus enabled devices with the Blink Marine 8 key keypad. We pre-program all of our keypads and label them with the appropriate CANBus Speed and ID. Will work with AIM, Hardwire, and many other CANbus enabled PDM's.

Control your Hardwire PDM or other CAN bus enabled devices with the Blink Marine 4 button keypad. We pre-program all of our keypads and label them with the appropriate CANBus Speed and ID. Will work with AIM, Hardwire, HTG GCU, and many other CANbus enabled PDM's.

Looking to run multiple AIM CAN devices- You'll most likely need this. If using the AiM PDM's, you'll need this to run additional CAN devices beyond the AiM GPS.