In-House Built, club level motorsports engine harness. Built with all Tefzel M22759/32 wire, DR-25 sheathing, and all high quality connectors. Built to avoid a mess of jumpers/adapters and fit neatly around that K24 engine.
This ecu will drive the ECT gauge unlike Kswaps using Kpro.
Highly recommend: Link CAN-LAMBDA Kit
Harness Notes-
Injectors (Select your connector type)
Not sure on your injector type? email us after purchasing with the injectors you plan to use, and we'll ensure you get the correct ones.
S2000/B-Series or K-Series TPS
S2000/B-Series or K-Series MAP
S2000 IAT in OEM location or K-Series IAT located 6inches in front of the throttle body.
K24 Crank Sensor
K24 Knock Sensor
Air Con ready!
S2000 Speed Sensor
S2000 Reverse light plug
AUX/SPARE:
DTM-8 with 12v, 5v, Ground, and Sensor Grounds, +4 spares
DTM-4 with Link CAN/12v/Ground. (Setup for Link CAN-LAMBDA)
Wiring Diagram and Base Map will be emailed once item is shipped.
The LINK ECU requires installing into the OEM ECU's Case.
