Megan Racing has unveiled our line of suspension components that offer the strength and adjustment that any competition vehicle will ever need. Constructed of forged aluminium that offer durability, strength and yet remain light-weight, these roll center adjusters have been track tested for months in road race, autocross events to assure quality and performance. Unlike other design that causes slippage and unnecessary movement, these solid offset RCA ensure front alignment stays constant.
Car alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, understeer, oversteer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified.
These Roll-Center adapters (installed together with the optional plates) are installed to correct suspension geometry after a car has been lowered. The uneven length of suspension arms causes Toe adjustments to occur drastically during braking suspension "squat", these Roll-Center Adjusters make up for the travel in the suspension arms to return suspension geometry to it's correct starting point. This allows alignment and steering to remain more consistent and predictable during aggressive driving and competition.
*MRS-HA-1550 is used for adding additional negative camber (negative 2-3 degree, up to -3.5 degree adjustment) for S2000 front camber.
- Extra thin piece is an optional adjustable piece (use depending on ride height for example). It can be added along for vehicles that are much lower for extra roll center adjustment.
- For extensive track usage, please use aluminium or heat wrap on rubber covered ball joints for prolonging life on these parts.
Application: Honda S2000 AP1/AP2 2000-2009
Customers who bought this item also bought
ARP 80-00 Honda M12x2.85inch 5 Wheel Stud Kit Replacing your wheel bearings? Might as well install some fresh studs at the same time. Sold in packs of 5.
Is your S2000 starting to shake under power or even light load? What about when cornering? This is the quick and easy fix. Axle spacers will push the axle cup further inwards giving it a nice fresh surface. Install time of 10-20 minutes and get back to enjoying that smooth Vtec again.
The stock S2000 rear toe arms tend to wear out and are not serviceable. Not only on the ball joint end, but the bushing tends to tear creating a lot of deflection when loaded. These Megan Racing rear toe arms work well with fixing the slop, while correcting some of the un wanted bump steer (esp on the early model S2000's).
